|
Installation Tips: |
 |
Important-Drill deep pilot holes for lag bolts. |
|
Drive lag bolts into studs using an electric drill. |
|
Do not drive or over torque lag bolts by hand using a ratchet. This can overtorque and break lag bolts. |
|
Use 1/4" X 4" toggle bolts for metal studs. Available at your local hardware store |
|
Before using, ensure pull up bar is properly secured to surface to prevent injury. |
|
Stud Bar is not responsible for injury or damage resulting from improper intallation. |
|
For concrete and brick applications contact www.confast.com for appropriate hardware. |
